Unit installation

VdS Shunt lock function 3066
Page 5
• Special model
If you want to keep a log of who switched the alarm system and when, you need an
activation unit with access logging (PLUS version).
 PLUS activation unit
Design is similar to the standard version, but with access logging and time zone
control.
Access logging The activation unit stores the last 128 accesses with date, time
and the user name of the transponder. You can read out the
data with the programming device or over the network.
Time zone
control
You can program activation units in such a way that authorized
transponders can switch the alarm system at certain times only.
Safety remarks
 Read through the operating manual carefully and thoroughly before putting the
shunt lock components into operation. This manual contains important information
on operation and programming.
 The components are built in accordance with the latest state of the technology.
Use them only as instructed and only when they are in perfect technical condition
and are properly installed according to the technical specifications.
 The manufacturer is not liable for damages that are caused by use that does not
comply with the directions.
 Keep the documentation that comes with the product and system-specific notices
in a safe place.
 Only trained experts are authorized to perform installation, programming and
repair work.
 Soldering and connection work within the entire system must be performed only
when the system is voltage-free.
 Soldering work must be performed with a temperature-controlled soldering iron
that is metallically separated from the power system.
 Observe VDE safety regulations and regulations of the local electric utility.
 Do not use the components in areas subject to explosion hazards or in areas with
fumes that dissolve metal or plastic.
 DIN norms and the guidelines of VDS Class C must be adhered to.