Unit installation

Smart Output Module
Page 16
10.0 Technical Specifications
Housing made of plastic with transparent
cover for mounting on DIN rail.
Dimensions: L x W x H
75 x 75 x 53 mm
(approx. 3.0 x 3.0 x 2.1 inches)
Weight Approx. 170 g (approx. 6 ounces) (without
packaging)
Degree of protection IP 20 (not tested for outside use)
Ambient temperature Operation: 0 – 60°C (32 – 140° F)
Storage: 0 – 70°C (32 – 158° F)
Air humidity <90% without moisture condensation
Supply voltage 11.0 to 15.0 VDC
Recommended: 12 VDC regulated
Power limit The power supply must be limited to a
maximum of 15 VA
Quiescent current <120 mA
Max. current <150 mA
Programmable pulse width 0.1 to 25.5 seconds
Output relay type Normally closed
Output relay and AUX relay continuous
current
Max 1 A
Output relay and AUX relay switch-on
current
Max 2 A
Output relay and AUX relay switching
voltage
Max. 24 V
Output relay and AUX relay switching
capacity
10
6
operations at 24 VA
Vibrations 15 G for 11 ms, 6 shocks to IEC 68-2-27,
not tested for continuous use under
vibrations
Output 1 switching current Max .1 A
Output 1 switching voltage Max. 24 V
Output 1 switching capacity Max. 1 VA
Output 1 switching behavior when voltage
is too low
V < 10.5 +/- 0.5 V corresponds to off