Unit installation

Smart Relay: SREL, SREL.ZK, SREL.ADV
Page 17
+ / ~
- / ~
NC
COM
NO
Brown
White
Green
Grey
Yellow
Batterie SREL.BAT
Netzteil
{
Relais
{
}
Externe Antenne
SREL.AV
F3
GND
Maximal + 24V
Entweder Buzzer oder LED
Ext. Netzteil
Evtl. Widerstand zur
Leistungsbegrenzung.
Der Ausgang F3 verträgt
max. 50 mA
Possibly resistor for restricting power
The F3 output is max. 50 mA.
Either buzzer or LED
External antenna
SREL.AV
External power
su
pp
l
y
Power
Battery SREL.BAT
Relay
If the current for the external component is larger than 10 mA, then this
component must be fed by an external power supply. In this case, the
connection should be made as follows:
7.16 Log unauthorised accesses
Only for SREL.ZK and SREL.ADV
Normally, only authorised transponder operations are logged. If you also want to
record attempts to open the door with an unauthorised transponder, you must select
this option.