Manual

Collecting and Shooting the SKS
6) Finally the mount fit snuggly into
the rifle. I reinstalled the pin.
7) The scope came with the rings
already attached, so I loosened them
and then set the scope in the notches
in the mount.
8) Tighten down the rings.
9) Tighten down the scope.
Figure 11 shows the assembled rifle
ready to take to the range and sight
in!
I do like this rifle project because I did not have to alter the rifle at
all. Over all it looks pretty good and the mount seems pretty
secure and does not seem to move. The scope for the price is
pretty nice and easy to get a good picture no matter the
magnification setting.
jlm ;)
Copyright 2002©
http://www.surplusrifle.com/sks/scope/index.asp (3 of 3) [11/8/2002 8:20:59 PM]