Manual

b.
Fit large end of gas tube over the gas
cylinder block on barrel.
C. Swing rear end of gas cylinder tube into
rear sight base.
d.
Turn gas cylinder lock down into the
detent.
6.
Replace bolt and carrier:
a. Connect bolt and carrier together and
place bolt and carrier into the receiver.
b.
Push down and forward all the way to seat.
7.
Replace recoil spring assembly:
a.
Insert recoil spring assembly, curled end
first, into bolt carrier.
b. Pull receiver cover pin fully to the right.
C.
Slide receiver cover into place from the
rear.
d. Secure cover with receiver cover pin.
e. Rotate pin down to locked position.
8.
Close magazine.
VII. P-~IONCHlXKWI'lWIN20SECONDS.
1.
Pull operating handle to the rear and hold it.
2.
Press down on magazine follower.
3.
Allow bolt to go forward.
4.
Place safety lever on "SAFE".
5.
Press trigger (harmwar should not go forward).
6. Place safety lever on "FIRE".
7.
Press trigger (hamner should go forward).
21