Manual

Is.
Adjust rear sight:
(See fig. 2.)
FIGURE 2
1.
Slip combination wrench over the front sight
post.
Turn ,post clockwise to raise the
strike of the bullet;
turn conterclockwise
to lower the strike of bullet.
2.
Remove tool from sight post.
2.
Loac' within 20 seconds:
a. Rotate safety for$?ard
this will be p'arallcl
b.
Pull operatin:! handle
into the "safe" position
with the stock.
back and release it.
If the magazine is empty, the bolt will
remain open.
C.
Insert a stripper clip into the clip guides at
the front of the bolt carrier.
d. Press cartridges off the clip and into the
magazine, (the thumb should be as close to the
face of the clip as possible).
e.
Remove empty clip.
NOTE:
IF CLIPPED AM!40 IS YoT AVAILABLE, INDIVIDUAL ROUNDS XAY
BE PLACED ON TOP OF THE XAGAZTPJE FOLLOWER AND PRESSED DoW?'J INTO
THE YAGAZILJE UNTIL IT IS FUJA.
15