Manual

a.
Remove magazine by pulling up and out.
e. Unlock bayonet and separate barrel from
the stock.
B.
Identify weapon parts.
(See fig 2).
C.
Cleaning and maintainance.
(See page 22).
D.
Reassemble weapon within 4 minutes:
1.
Attach barrel to stock, and
into closed position.
lock bayonet
2.
Replace magazine into stock
open.
3.
Replace trigger group:
a. Invert rifle and engage
leaving it
pins at the
front of the trigger group (notches
must be behind the magazine box).
b. Swing trigger group into position in
the stock (seat it by a hand blow on
the loop of the trigger guard).
c. Move safety to "FIRE" position to
insure catch is fully engaged.
4.
Replace gas piston extension and spring:
a. Place gas piston extension and spring:
b.
Hold gas tube lock in vertical position.
C. Insert gas piston extension with spring
back into it's recess in front of the
rear sight.
d. Push back into recess until it can be
locked into place.
e. Dock by rotating gas tube lock 45 degree
angle to the rear.
5.
Replace gas cylinder tubs and piston:
a. Slide gas piston, small end first, into
the front of the gas tube.
20