Manual

f.
Pull operating handle back and release it.
(Dolt will go forward and chamber a round).
3. Fire within 5 seconds: ,
a. Rotate the safety selector to the rear until
it is pointed full down and is against the
rear of the trigger guard. ("FIRE" position).
b.
Aim and fire.
The bolt will remain closed
between rounds and open after the last round.
4. IMMEDIATE ACTION TO: Reduce stoppage.
a. When rifle fails to fire, pull the operating
handle back to eject bad round, watch for
ejection, release handle to chamber new round.
b.
Aim and atempt to fire.
C.
If immediate action fails to reduce stoppage,
unload, clear, disassemble, and inspect.
Repair or replace defect and reasemble.
5. UNLOAD AND CLEAR WEAPON:
a.
b.
C.
d.
e.
f.
g.
h.
Place weapon on "SAFE".
Pull back magazine catch and allow magazine to
swing open.
Remove all cartridges
Close the magazine.
Pull operating handle
remaining rounds.
to the rear to eject any
Release the handle (bolt will remain open).
Inspect to insure no cartridges remain in the
magazine, chamber, or receiver.
Close bolt:
1.
Open magazine again and pull operating
handle to rear and release.
2. Pull operating handle to the rear, press
down on the magazine follower slightly,
then ease bolt carrier forward.
16