SDS

EYE, SKIN AND RESPIRATORY IRRITANT. Contents under pressure. Keep out of reach of children.
Read label cautions carefully. Follow label directions to avoid injury. Use with adequate ventilation. Do
not use in confined areas. Keep away from heat, sparks or open flames. Wash hands thoroughly after
each use. Do not smoke while using. Avoid contact with skin and eyes. Avoid breathing vapor or mist.
Do not puncture container.
Keep out of reach of children. Do not store near heat, sparks, or open flames. Do not expose to
temperatures above 120°F as container may vent, rupture or burst. Do not puncture or incinerate
container.
Store in accordance with NFPA 30B for LEVEL 3 AEROSOL.
Handling Precautions:
Storage Requirements:
EXPOSURE CONTROLS/PERSONAL PROTECTION8
Use ventilation adequate to keep exposures below recomended exposure limits.
HMIS PP, B | Safety Glasses, Gloves
Eye Protection: Wear eye/face protection.
Hand Protection: Wear suitable gloves.
Skin and Body Protection: Wear suitable protective clothing.
Respiratory Protection: In case of insufficient ventilation, wear suitable respiratory equipment.
EXPOSURE LIMITS
INGREDIENTS OSHA-PEL ACGIH-TLV OTHER
Distillates, petroleum, hydrotreated
Not established 200 ppm (8 hr)
Citrus Terpenes
Not established Not established 30 ppm 8hr (AIHA)
Polyetoxylate/Nonylphenol Ethoxylate
Not established Not established
Propane
Unknown 1000 ppm
Butane
Unknown 800 ppm
Engineering Controls:
Personal Protective Equip:
PHYSICAL AND CHEMICAL PROPERTIES9
Physical State: Mixture packaged in pressurized aerosol spray can.
Odor: citrus
Solubility: Emulsifies in water
Spec Grav./Density: 0.770 - 0.870 g/ml
Viscosity: < 5 cSt
Heat Value: 42.7 kJ/g (estimated)
Flammability: Flammable
Flash Point: Not established (concentrate) / -156°F (-104.4°C) (propellant)
Vapor Pressure: Not established
pH: Not applicable
VOC: 49.5%
Evap. Rate: < 1,00 (BuAc=1)
Auto-Ignition Temp: Not established
UFL/LFL: Not established
Appearance: light straw color, clear to slightly hazy liquid
STABILITY AND REACTIVITY10
Product is stable under normal conditions.
Heat, sparks, open flames and temperatures above 120°F
Strong Oxidizing Agents.
Stability:
Conditions to Avoid:
Materials to Avoid:
Safety Data Sheet
Revision Date: 9/4/2015SDS Number: 1652736
Page of
4 6
SDS
SIMONIZ - AERO ADHESIVE REMOVER #S33650