Operating instructions
Cleaning and Maintenance
/
Technical Specifications
21
7.6 Winterizing Procedure
• Pressure washer might be damaged if subjected to
freezing temperatures. This type of damage is not
covered by the limited warranty. To avoid possible
damages, use a small amount of antifreeze.
• Place the pressure washer on its side, with the
water inlet (8) facing upwards, and pour 1/4 cup (60
ml) of antifreeze into the water inlet (8).
• Make sure the engine
I/O
switch is set to
O
position
and pull the starter cord handle several times to
distribute the antifreeze inside the pump system.
• When taking the pressure washer out of storage,
run water through the system until it runs clear.
8.
T
ECHNICAL
S
PECIFICATIONS
Maximum Pressure
2600 PSI
Rated Water
Pressure
2000 PSI
Maximum Water
Flow
7.5 litres per minute
(LPM) (2.0 gallons
per minute (GPM))
Minimum Inlet
Pressure
30 PSI
Maximum Inlet
Pressure
100 PSI
Pump Type
Heavy-duty,
maintenance-free
axial
Thermal Relief
Valve
Included
Detergent Tank
(Volume)
0.66 G (3 L)
Maximum
Temperature of
Pumped Water
40°C (104°F)
Engine Power
(OHV)
6 HP
No Load Speed
3600 RPM
High Pressure
Hose Length
25' (7.6 m)
Inlet & Discharge
Ports
3/4" (13 mm)
standard garden
hose connector
Displacement
173 (cc)
Net Weight
61 lb. 11 oz. (28 kg)
Oil Type
SAE 10W30
Oil Capacity
0.6 L
Fuel Type
Unleaded Gasoline
Fuel Tank
1.4 L
IMPORTANT
• If the pressure washer is to be stored with
gasoline in the fuel tank and carburetor, it is
important to reduce the hazard of gasoline vapour
ignition.
• Select a well-ventilated storage area away from
any appliance that operates with a flame, such as a
furnace, water heater, or clothes dryer. Also avoid
any area with a spark-producing electric motor, or
where power tools are operated.
• If possible, avoid storage areas with high humidity,
because that promotes rust and corrosion.
• Place the pressure washer on a level surface.
Tilting can cause fuel or oil leakage.
• Do not use plastic sheets as a dust cover. A
nonporous cover will trap moisture around the
pressure washer, promoting rust and corrosion.