Operating instructions

Assembly Instructions
12
4. A SSEMBLY I NSTRUCTIONS
Frame Assembly
Position handle assembly (C) and
main frame (A) and connect them
with square neck bolt (I), then
fasten with the knob (J). Repeat
this procedure for the opposite side.
When storing the machine, you can
unscrew the knob and fold down
the frame.
Gun Holster Assembly
Slide the upper gun holster (G) all
the way down into the handle
assembly (C).
Wheel Assembly
NOTE: Make sure that there is
enough air in wheel before
assembly.
Lift the frame (A) with one hand and
attach one of the wheels (B) by
pressing the wheel’s pin and
inserting the wheel shaft into the
main frame (A). Align the pin with
the hole on the frame (A) until it
snaps in. Repeat for the opposite
side.
1
2
3