Owner`s manual

13 14
OPERATING INSTRUCTIONS
CAUTION
Failuretocleanproperlywillcausethedetergentinjectionsystemtobecome
cloggedandinoperable.
CAUTION
Neveruse:
•Bleach,chlorineproductsandothercorrosivechemicals
•Liquidscontainingsolvents(e.g.paintthinners,gasoline,oils)
•Tri-sodiumphosphateproducts
•Ammoniaproducts
•Acid-basedproducts
Thesechemicalswillharmtheunitandwilldamagethesurfacebeingcleaned.
CAUTION
Draingunassemblyofanyremainingwater.Aimgundownwardsandsqueezetrigger.
WINTERIZING AND LONG-TERM STORAGE
OptimumWinterizingProcedure
Winterizing your pressure washer will help protect it and prolong its life. We strongly
recommend you follow the steps below using Pressure Washer Antifreeze (039-8602-0).
This will keep the internal parts lubricated, protect them from rust, and prevent the pump
from freezing.
1. Connect the pump saver to the inlet adaptor.
2. Depress the button on top of the pump saver container.
3. Continue until fluid exits the pressure hose.
4. Remove the hose from the pump inlet.
PUMP SAVER
Recommended: Pressure Washer Antifreeze (039-8602-0)