Tus neeg siv phau ntawv

Notes:
* Your TV’s audio settings may be set to “Variable”
or “Fixed”. We recommend that you set your audio
settings to “Fixed” for better audio quality when
using this installation option. If you want to be able
to control your TV volume level separate from your
SIMOLIO SM-828D1 / SM-828D2 volume level,
you will need to make sure your TV is set to “Fixed”.
Contact your TV manufacturer for assistance.
Step 2. TV Audio Format and Speaker Setting (use TV remote control)
If you can not hear sound from your headphones after connecting:
Note:
Setting menu may be different depending on different TV brands and models.
RCA
OUT
L
R
COAXIAL IN
Connect TV/
Cable box/
STB etc.
RCA Audio Cable
COAXIAL IN
Connect TV/
Cable box/
STB etc.
1) TV/Audio Source only has Digital Coaxial Audio Out port
3.4 Other Connections in Special Cases
* Setting menu may be different depending on different TV brands and models.
Fig 3-19
Step 1. Purchase a Digital to Analog Converter and Set up as Shown in
Fig 3-16
If your TV/Audio Source only has a digital coaxial audio out port, you will need
a digital to analog converter (DAC) for installation.
• Ensure TV Audio Format is set to “PCM” or “Dolby/DTS” is OFF (This is
IMPORTANT, Ref. Fig 3-17)
PS: for certain smart Samsung models, the TV is retaining separate settings for
regular TV and internet TV setup. When you turn to the Smart Hub for Internet source,
please use the TV remote to go to Settings > Sound > Expert Settings > Audio Format
or Digital Output Audio Format, then select PCM.
• Ensure your TV speaker is set to “External Speakers”. (Ref. Fig 3-18)
• Take turns to test RCA connection and 3.5mm /AUX connection.
Fig 3-15
SETTINGS
ANALOG AUDIO OUT
VARIABLE
FIXED
SOUND / AUDIO
Fig 3-17
Fig 3-18
Speakers
Internal speakers
External speakers
Headset
Settings
Audio Format
Dolby Digital
DTS
DTS Neo 2:5
PCM
H/P
L
R
94dB 85dB
75dB
volume
L
L
a wired headphone/earphone
94dB 85dB 75dB
volume
or
2) If your TV/Audio Source’s Digital Optical Audio Out port is occupied
by soundbar, you can use the by-pass feature.
Please make sure you use the same type of input/output.
• Use a wired headphone/earphone to plug into the H/P port or RCA output of the
DAC to test if you can hear the TV sound. (Ref. Fig 3-19)
Transmitter
Fig 3-20
Digital Audio Out
(Optical)
A) If you're using Optical cable to connect the wireless transmitter to TV,
please use Optical cable to connect to the sound system.(Ref. Fig 3-20)
B) If you’re using the AUX/RCA cable to connect the wireless transmitter to
TV, please use AUX/ RCA cable to connect to sound system.(Ref. Fig 3-21)
wireless
transmitter
Coaxial
Digital Out
AUDIO IN
Digital to Analog Converter
RCA OUT
L
R
COAXIAL IN
Fig 3-16
POW ER
DC 5V
AUX
STER EO / MONO / O FF
OPTI C
AL
OPTI C
AL
AUX
IN
OUT
ON / OFF
POW ER
DC 5
V
AUX
STER
EO / MO
N
O / OFF
OPTI CAL
OPTI C
AL
AUX
IN
OU
T
ON / OFF
a wired headphone/earphone
12 13
SM-828D1/SM-828D2 SM-828D1/SM-828D2
+ VOL -
L
R
Sound Bar
OPTICAL IN
OPTICAL OUT
Power adapter
Optical In