Tus neeg siv phau ntawv

3.3 3.5mm/AUX Analog Connection
This part is an alternative to 3.1 and 3.2 on page 8-10. This part will explain how
to connect the SIMOLIO SM-828D1 / SM-828D2 transmitter to your television,
satellite, or cable box using a 3.5mm/AUX analog audio cable.
*Setting menu may be different depending on different TV brands and models.
Step 2. TV Audio Out Checking and TV Speaker Setting (use TV remote
control) If you can not hear sound from your headsets after connecting:
Notes:
* If your TV only support single sound out, the TV’s speakers will be either
automatically muted when you plug something into an audio out port (Optical/
AUX/RCA, etc.) or they become disabled once you choose "External Speakers"
as your TV's audio output. It depends on TV circuit design.
• Ensure use TV Red/White ports labeled “AUDIO OUT” or “OUTPUT, other
Red/White ports are incorrect. (Ref. Fig 3-9)
• Ensure your TV speaker is set to “External Speakers. (Ref. Fig 3-10)
For most TVs, the TV's internal speakers and an external audio device can work
simultaneously. Such as, for some newer LG TVs, when do analog RCA audio
connection, you can set the “Sound Out” to “Internal TV Speaker + Headphones.
And for some newer Samsung TVs, you can enable this feature by selecting “TV
Speaker” from the TV Sound Output lists.
SETTINGS
ANALOG AUDIO OUT
VARIABLE
FIXED
SOUND / AUDIO
AUDIO OUT
R
L
COMPONENT IN
VIDEO IN
TV REAR
Fig 3-9 Fig 3-10 Fig 3-11
Speakers
Internal speakers
External speakers
Headset
* Your TV’s analog audio settings may be set to “Variable” or “Fixed. If you
want to be able to control your TV volume level separate from your SIMOLIO
SM-828D1 / SM-828D2 volume level, you will need to make sure your TV is set
to “Fixed.Contact your TV manufacturer for assistance. (Ref. Fig 3-11)
Plug one end of the 3.5mm audio cable into the “Audio Out” port on the back of
the TV. Plug the other end of the audio cable into the port labeled “AUDIO IN
on the back of the transmitter.
• If you connect the 3.5mm audio cable to the 3.5mm Audio Out port which is
usually a Headphone port on your TV, your SIMOLIO SM-828D1 / SM-828D2
will still function properly, but the sound to your TV internal speakers will be
muted. The port is usually labeled with an headphone icon.
• Be aware that the base should be placed at least 4 feet away from your
Router/smart WiFi TV/TV sticks/WiFi TV box to avoid interference.
Step 1. Hook up SIMOLIO to the 3.5mm Audio Out Port of the TV/other
Audio Device
Step 2. TV Audio Out / TV Speaker Setting (use TV remote control)
If you can not hear sound from your headsets after connecting:
• Plug a wired headphone/earphone into the 3.5mm audio out port of the TV to
test if you can hear the TV sound. (Ref. Fig 3-14)
• Ensure your TV speaker is set to “Headset. (Ref. Fig 3-13)
Fig 3-13 Fig 3-14
H/P or Au
dio Out
Speakers
Internal speakers
External speakers
Headset
a wired headphone/
earphone
94dB
85dB
75dB
volume
L
AUX/3.5mm Audio Cable
H/
P or
Audio Out
Fig 3-12
POW ER
DC 5V
AUX
STERE O / MONO / OF F
OPTI CAL
OPTI CAL
AUX
IN
OUT
ON / OFF
AUX IN
• If you cannot get to the back of your TV and you only watch the programs
through a fixed TV box (cable/satellite box/DVD etc.), you can also use these
instructions to install the system to your TV box.
10 11
SM-828D1/SM-828D2 SM-828D1/SM-828D2