Tus neeg siv phau ntawv

USB cable
Speaker
OPTICAL
Input
Option AUX cableA
B
C
Option RCA cable
Option Optical cable
Speaker
RCA
Input
Speaker
AUX
Input
USB port
on a PC/a power adapter
Fig 12
Fig 13
AUX
OPT ICAL
USB &
POW ER IN
AUX
OPT ICAL
OUTP UT TO SPE AKER
INTP UT FROM T V
13 14
6. Use as Bluetooth Receiver (RX Mode)SIMOLIO JH-202D
Step 1: Connect Bluetooth receiver to a power source using the supplied USB
cable. (Ref. Fig12)
SIMOLIO JH-202D
Step 2: Connect your speaker to Simolio JH-202D Bluetooth receiver using one of the three audio
cables provided (optical/RCA/3.5mm AUX). (Ref. Fig 13)
6.1 Power on and Set up SIMOLIO JH-202D Bluetooth Receiver
SIMOLIO JH-202D
SIMOLIO JH-202D
will automatically connect to the last paired devices after both devices are
powered on. If not, please restart either the Bluetooth headphones or
Bluetooth transmitter.
Reconnect
5.4 Disconnect and Reconnect in TX Mode
Disconnect
To disconnect, you may either turn off Bluetooth receiver, or the Bluetooth on the
transmitting device like cell phone, PC, etc…
SIMOLIO
5.3 Connect SIMOLIO JH-202D to Your PC/Laptop
Select “USB” via “OPT/AUX/USB” switch and
the USB LED will light up white. Then use the
supplied USB cable to connect SIMOLIO
JH-202D Bluetooth transmitter to your PC/Laptop.
Please note:
If the USB cable you used for connection is
not the supplied one, please make sure that
the USB cable supports both data syncing and
power charging.
USB Audio Out
USB IN
POWER&DATA
Fig 11
AUX
OPTI CAL
USB &
POWE R IN
AUX
OPTI CAL
OUTPU T TO SPEA KER
INTPU T FROM TV
Step 3: Switch the “ON/OFF” switch to “ON” position. You will hear “Power on” from your speaker.
Please note: The receiver will automatically power off if there is no connection for 10 minutes.
To use it again, switch the receiver off first, and then on again.
JH-202D JH-202D