Tus neeg siv phau ntawv

11 12
Note:
1. Ensure your TV speaker is set to “Headset”, or other suitable selection.
2. You may plug a wired headset/earphone into the 3.5mm audio out port of theTV/ TV box
(cable/satellite box/DVD etc) to test whether if you can hear the sound. (Ref. Fig 9)
3. Please place the transmitter away from Router/ smart WiFi TV/TV sticks/WiFi TV box to avoid
interference.
4. TV speaker setting differ from TV brands and models. For more information, please refer to
your TV manual or consult your TV manufacturer.
(Ref. Fig 8)
3) 3.5 AUX Connection & Connecting with AVR Using 6.35 Phone Jack
Select AUX via “OPT/AUX/USB” switch; use the 3.5mm AUX cable to connect the transmitter to
your TV as shown in Fig 7 Option A.
If you are connecting the transmitter to your AV receiver’s 6.35mm BIG PHONE JACK, purchase
a 6.35mm to 3.5mm adapter and perform the connection as shown in Fig 7 Option B.
Fig 9
H
/P or Au
dio Out
a wired headphone/
earphone
94dB
85dB 75dB
volume
L
AUX
OPTI CAL
USB &
POWE R IN
AUX
OPTI CAL
OUTPU T TO SPEA KER
INTPU T FROM TV
TV
AUX
Output
Phones
3.5mm Audio Cable
6.35mm Phone jack
Fig 7
Speakers
Internal speakers
External speakers
Headset
Fig 8
AV Receiver
Phones
TV REAR
AUX cable
B
Option
A
AUX cable
Option
5. Connect to TV & DVD/STB/other devices at the same time (Ref. Fig 2-12), just press OPT or
AUX according to the audio source being played, avoiding repeated unplugging and
connecting between different audio sources.
Pho nes
AV Receiver
6.35mm Audio Adapter
(purchase separately)
3.5mm Audio Cable
6.35mm Phone Jack
Digital Audio Out
(Optical)
Fig 10
AUX
OPTI CAL
USB &
POWE R IN
AUX
OPTI CAL
OUTPU T TO SPEA KER
INTPU T FROM TV
AUX
(Ref. Fig 10)
JH-202D JH-202D