Tus neeg siv phau ntawv

09 10
2) RCA Analog Connection (Ref. Fig 5)
Select AUX via “OPT/AUX/USB” switch; use the red and white RCA
cable to connect the transmitter to your TV as shown in Fig 5 (must be
red and white ports labeled “AUDIO OUT” or “OUTPUT” on the back of
the TV/TV box (cable/satellite box/DVD etc).
Speakers
Internal speakers
External speakers
Headset
Fig 4
Note:
If your TV only support single sound out, the TV’s speakers will be either automatically muted
when you plug something into an audio out port (Optical/AUX/RCA, etc.) or they become
disabled once you choose "External Speakers" as your TV's audio output. It depends on TV
circuit design.
AUDIO OUT
R
L
COMPONENT IN
VIDEO IN
TV REAR
Fig 5
Fig 6
TV REAR
RCA Audio Cable
R AUDIO OUT L
AUX
OPTI CAL
USB &
POWE R IN
AUX
OPTI CAL
OUTPU T TO SPEA KER
INTPU T FROM TV
AUDI
O IN
Note：
1. Make sure to use TV Red/White ports labeled “AUDIO OUT” or
“OUTPUT”, other Red/White ports are incorrect. (Ref. Fig 6)
Note:
1. Please check and remove the protective plastic caps from both
ends of the optical digital audio cable.
2. Ensure “TV Audio Format” is set to “PCM” or “Dolby/DTS” is OFF
(This is IMPORTANT.) (Ref. Fig 3)
3. Ensure your TV speaker is set to “External Speakers”, or other
suitable selections. (Ref. Fig 4)
4. Please place the transmitter away from Router/ smart WiFi TV/TV
sticks/WiFi TV box to avoid interference.
5. PCM setting and TV speaker setting differ from TV brands and
models. For more information, please refer to your TV manual or
consult your TV manufacturer.
Settings
Audio Format
Dolby Digital
DTS
DTS Neo 2:5
PCM
Fig 3
2. Ensure your TV speaker is set to “External Speakers”, or other suitable selections.
3. Please place the transmitter away from Router/smart WiFi TV/TV sticks/WiFi TV box to avoid
interference.
4. TV speaker settings differ from TV brands and models. For more information, please refer to
your TV manual or consult your TV manufacturer.
(Ref. Fig 4)
JH-202D JH-202D