Tus neeg siv phau ntawv

05 06
aptX turns solid white
Connected using aptX HD codec
Status Indication
LED status
5. Use SIMOLIO JH-202D as Bluetooth Transmitter (TX Mode)
5. 1 Connect Bluetooth Headphones to SIMOLIO JH-202D
Plug the supplied USB cable to a compatible TV USB or USB power adapter(5V 500mA-2A), plug
the other end of the USB cable into the port labeled “USB & POWER IN”. Then slide the ON/OFF
switch to “ON”. Slide the TX/Bypass/RX switch to “TX & Bypass”.
Get SIMOLIO JH-202D into Pairing Mode
When using the transmitter for the first time, or after the pairing history of Bluetooth
transmitter is cleared, the transmitter will automatically enter pairing mode after being powered
on. Bluetooth indicator will flash RED and BLUE alternately.
For non-first time use, please press and hold the “PAIR” for 3 seconds until the Bluetooth
indicator flashes red and blue alternately.
SIMOLIO
After the first headphones are connected to SIMOLIO JH-202D, press and hold the PAIR button
for 3 seconds until Bluetooth indicator flash RED and Blue alternately. Get the headphones into
the pairing mode. Bring the 2nd headphones close to SIMOLIO JH-202D and wait. After
connection, the Bluetooth indicator on the transmitter will turn SOLID purple.
Get Bluetooth Headphones into Pairing Mode
For this part, please refer to your headphones’ user manual for instructions. In most cases,
Bluetooth headphones enter pairing mode when the headphones’ LED flash red and blue
alternately, or when it flashes blue quickly.
Connecting 1st Bluetooth Headphones to SIMOLIO JH-202D
During the pairing process, please bring the 1st Bluetooth headphones close to SIMOLIO
JH-202D and wait. After connection, the Bluetooth indicator on SIMOLIO JH-202D will turn
SOLID blue.
Connecting 2nd Bluetooth Headphones to SIMOLIO JH-202D
NOTE:
a. SIMOLIO JH-202D will not enter pairing mode if there are already two sets of Bluetooth
headphones connected to it.
b. If Bluetooth headphones support LL and HD, SIMOLIO JH-202D will automatically select and
go into LL. You may select “HD” while streaming musical content with HD quality, and select
“LL” while watching TV programs or films, etc…
c. With dual streaming, please make sure that BOTH sets of Bluetooth headphones are aptX LL
supported. If either set of the Bluetooth headphones do not support LL codec, aptX LL codec
will not be available.
Power and Turn on SIMOLIO JH-202D
Part 2
USB LED turns solid white Working with PC/laptop USB connection (TX mode only)
HD turns solid white
LL turns solid white
FS turns solid white
SBC turns solid white
Connected using FS codec
Connected using SBC codec
Connected using aptX codec
Connected using aptX LL codec
JH-202D JH-202D