Tus neeg siv phau ntawv

23 24
When using the Bypass Function
Phenomena Causes Solutions
The audio input and output are
different type when SIMOLIO
JH-202D are working under
“TX+BYypass”
Faulty USB cable.
No sound
Check by using another workable type
USB cable.
Please make sure the Bluetooth transmitting
device support aptX LL codec. For certified
device list, please go and check on
www.aptx.com. aptX supported
Bluetooth headphones including: JH-716B.
SIMOLIO
Faulty Power source.
Make sure the audio input and output are of
the same type i.e. AUX input to AUX output,
OPT input to OPT output.
Check by using another power source like PC
USB port, socket, different USB
charger(5V/500mA-2A).
Audio delay
when
watching TV
Bluetooth transmitting device
is NOT aptX supported.
SIMOLIO
Receiver
cannot be
powered
successfully
Part 2
Move Simolio receiver closer to your Bluetooth
transmitting device. Please note that work range
is decided by both devices on both ends. You may
test the work range of your Bluetooth phone/
PC/tablet with another Bluetooth headset.
Short working range of
Bluetooth transmitting
device.
Sound cuts in
and out/ static
Reset Simolio and Bluetooth transmitting device like
cell phone, PC, etc…/ Clear pairing history and repair.
Remove obstacles. Put Simolio receiver away from
interference sources, including Router/ smart WiFi
TV/ TV sticks/WiFi TV box…, if any.
Physical obstacles or
wireless signal
interference.
Unstable Bluetooth
connection.
Phenomena Causes Solutions
Check by using another workable USB cable.
Check by using another power source like PC USB
port, socket, different USB charger(5V/500mA-2A).
Faulty USB cable.
Faulty Power source.
Receiver cannot
be powered
successfully
Volume on Bluetooth
device is low.
Low volume from
the speaker/
stereo, etc.
Check and turn up the volume of your Bluetooth
device.
Volume on your speaker,
stereo, etc. is set low.
Check and turn up the volume of your speaker,
stereo, etc.
JH-202D JH-202D