Tus neeg siv phau ntawv

17 18
USB port on a PC/a power adapter
Fig 15
TV REAR
AUX
OPTI CAL
USB &
POWE R IN
AUX
OPTI CAL
OUTPU T TO SPEA KER
INTPU T FROM TV
Audio input from TV
Audio input selected
Output to speakers
OPT
AUX
OPT
AUX
OPT
AUX
Connect SIMOLIO JH-202D to the speakers or other suitable audio devices using any of
the three audio cables.
Please note in this TX+ bypass mode, it will only work when:
Disconnect all the Bluetooth devices connected, press and hold the “Bluetooth Button”
simultaneously for 10 seconds until the Bluetooth indicator flashes red and blue alternately. After
the pairing history is cleared, SIMOLIO JH-202D will automatically enter pairing mode, with
Bluetooth indicator flash RED and BLUE alternately.
8. Clear Pairing History
9. Troubleshooting
Phenomena Causes Solutions
Not
connected
Either SIMOLIO or
Bluetooth receiving
devices are not in pairing
mode, or connected to
other Bluetooth devices.
Turn off other Bluetooth devices, clear pairing history
of transmitter and Bluetooth headphones
and receivers, repair.
SIMOLIO
Check by connecting SIMOLIO JH-202D to other
Bluetooth headphones.
Check the Bluetooth headphones by pairing the
headphones to other audio devices like cell phones,
Bluetooth enabled PC, etc…
Part 1
When used as Bluetooth transmitter
The selection of audio
input on the transmitter
is wrong.
Check transmitter’s audio setting. Set to
the right mode. OPT for optical input, and AUX for
AUX & RCA input, USB for USB input.
SIMOLIO
JH-202D JH-202D