User manual

SRP9170 and SRP9180 ~ PMR Portable Radio User Manual

2. FRONT PANEL CONTROLS

Accessory

Connector

Function #7

Selector Switch

ABC Switch

On/Off Volume

PTT

Function #5

Function #6

Function #2

Function #1

Function #3

Function #4

Antenna

Keypad

Indicator LED

Figure 1 SRP9180 Portable Layout

CONTROL FUNCTION

On/Off/Volume Rotate clockwise to turn on the radio and then set volume to desired level.

Selector Switch Rotate the switch to select the desired channel.

ABC Switch Programmer configurable 3 position function switch.

Rx/Tx/Power LED Green LED illuminates when receiving a signal. Red LED illuminates when

the radio is transmitting. Flashing Red LED indicates low battery.

PTT Push-to-Talk. Hold the radio 10cm from the mouth. Press and hold the PTT

switch and speak. Release to listen.

Keypad Used to select channel numbers, set status and send DTMF or Selcall.

Function Key F1

Programmer configurable function key. It is typically programmed as the

Menu Select key.

Function Key F2

▼

Programmer configurable function key. It is typically programmed as the

Down key for scrolling.

Function Key F3

▲

Programmer configurable function key. It is typically programmed as the

Up key for scrolling.

Function Key F4

Programmer configurable function key. It is typically programmed as the

Send Channel Encode key. Note that during menu operations it becomes

the Confirm key.

Special Function F5 Programmer configurable function key.

Special Function F6 Programmer configurable function key.

Special Function F7 Programmer configurable function key. It is typically programmed as the

Alarm / Emergency key.