User manual

SRP9170 and SRP9180 ~ PMR Portable Radio User Manual

RF Exposure Compliance and Control Guidelines and

Operating Instructions

To control exposure to yourself and others and ensure compliance with the Occupational/ Controlled

environment exposure limits always adhere to the following procedures.

Guidelines:

 User awareness instructions should accompany the device when transferred to other users.

 This radio meets the FCC RF exposure guidelines when used with the Simoco accessories

supplied or designated for the product. The designated Simoco belt clip type is PAR-9180CLIP

and leather pouches for bodyworn use are Simoco types PAR-9180CLBC2 and 3, and PAR-

9180CHSM with extension speaker microphone type PAR-LMS2. Use of other accessories

may not ensure compliance with the FCC’s RF exposure guidelines and may violate FCC

regulations.

 Do not use this device if the operational requirements described herein are not met.

Instructions:

 Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the Push-

To-Talk button. To receive calls, release the PTT button. Transmitting 50% of the time, or less, is

important because this radio generates measurable RF energy exposure only when transmitting

(in terms of measuring for standards compliance).

 Do not operate the radio without an approved antenna attached, as this may cause the FCC RF

exposure limits to be exceeded. With this product, use only an antenna supplied or approved by

Simoco.

 Always keep the radio at least 5 cm (2.0 inches) from the face when transmitting and at least 10

mm (0.4 inches) from the body. This radio has been tested for RF exposure compliance at the

distances listed in Table 1.