User manual

SRP9170 and SRP9180 ~ PMR Portable Radio User Manual

2. The Saved-Status-Value can also be set from the Channel or Phonebook Screens

by entering the number (from the Keypad) and pressing the

* key. The value is saved

but not sent.

4.4 SEND MESSAGE SCREEN

This Screen allows the user to send a free-form text

message to another radio user in a similar manner to a

mobile phone SMS.

After selecting the

Send Message menu option with the

OK key, a flashing cursor will appear on the lower LHS of

the screen.

Each keypad button is labelled with up to 4 text characters

(eg. 7=PQRS). The text characters are entered by

pressing the keypad once for the first character, twice for

the second, and three times for the third, and so on.

After a short delay, the cursor will advance to the next

character entry.

To move the cursor left or right, use the

▼/▲ keys.

To delete a character, move the cursor over the character, then press the

F6 key (when

configured for

Reset, or any other key configured for Reset).

A total of 237 characters may be entered.

When the message is complete, press the OK key to send

it.

The screen will then prompt for the address to send it to

with “

Enter No.”. Enter the data address and then press

OK. The message will be sent.

After the message is sent, the display will indicate whether the message delivery was successful

with “Confirmed” if delivered and “Call Failed” if the message could not be delivered.