User manual

SRP9170 and SRP9180 ~ PMR Portable Radio User Manual

3. MENU SYSTEM

The SRP9180 radio software uses a programmed menu structure to enable the operator to

access the radio options. The structure of the menu can be configured to meet the customer’s

specific needs using of the FPP.

Figure 1 (overleaf) illustrates the menu structure of the radio. Note that the order and presence

of each menu is determined by the configuration of the radio programmed by the FPP.

The Setup sub-menus provide access to radio setup parameters.

Possible Menu entries are:

 Phone Book

 Zone

 Status

 Stored Calls

 Mute Adjust

 Setup

 User Options

 User CTCSS

 Phone Book Edit

 Contrast

 Alert Volume

 Radio Information

 Mode Selection or Network Selection

 Received Signal Strength Indication (RSSI)

 Lone Worker

 Send Message

To assist the user in menu key selection, a soft menu label will often appear above the function

keys. The label shows the user the current function for that key which may change between

different menus.

Programming of menus is a configuration task normally performed by the system manager using

the FPP.

3.1 MENU NAVIGATION

The M key is generally used to select Menu mode from the main Channel Screen. Once in

Menu mode, the ▼/▲ keys cycle through the menus.

To exit Menu mode, press the M key again or the Menu timeout will exit automatically.

Generally, pressing the M key while in a menu backs up to the next highest level of menu and

the OK key selects the function.

The ▼/▲ keys are generally used to navigate through a list of options, or to increase or

decrease a value.