Operating instructions

Page 22
SRP9180 - Trunked Portable Radio User Guide
7.1.3.4 USING THE KEYPAD
When using the keypad to enter text:
•Presstheappropriatekeypadkeyanumberoftimesuntilthedesiredcharacterornumberisselected.
•Thecurrentcharacterpositionisidentiedbyaashingblockcursor.
•Use#toselectlower/uppercaseletters.
•Use*forspecialcharacters.
•Usethekeystomovetothenextorpreviouscharacterspacetobeentered/modied.
•Usethespacekey,“0”toerasecharacters.
•PressOKtoacceptchanges.
7.1.4 Contrast
•TheContrastScreenallowsyoutosetthecontrastleveloftheDisplayin
the range from 0 to 15.
•Usethekeystoselecttherequiredcontrastsetting.
•PressOKorBacktoacceptthesettingandreturntotheIdleScreen.
7.1.5 Alert Volume
This Screen allows you to set the level of the Alert Volume Beep Tone
in relation to the current Volume setting. The level can be set in
63 steps over the range -31 to +31.
•Usethekeystochangetherelativealertlevel.
•PressOKorBacktoacceptthesettingandreturntotheIdleScreen.
Note: A minimum Alert Level may be set to ensure Alerts can always be heard from the speaker.