Service manual

D.6 TP0332/2
To navigate the on-line Help using the keyboard, use the Tab key to move between highlighted
topics. If you are unsure of the meaning of a term, select the Glossary key to display a list of terms.
More assistance on using on-line Help may be accessed through the item How to Use Help on the
Help window’s Help menu.
Certain Help topics can also be accessed in a context sensitive manner. These topics are:
Modifying the Hardware Code.
Displaying Analogue Measurements.
Setting Environment Options.
To access these topics directly during the relevant operation - press the <F1> key; this will bring up
the Help topic for that operation.
Quitting the Alignment Tool
The Alignment Tool application may be terminated using any of the methods for closing a Windows
application including:
From the File menu, select Exit.
Double click on the Alignment Tool’s control menu box (or click once and select Close)
situated on the window’s extreme top left hand corner.
Press the <ALT> and <F4> keys simultaneously whilst in the application window
End the task ‘SRP80 Series Alignment Tool’ through the task list.
Once the Alignment Tool application has been closed, any memory resource that it was using is
automatically freed for other applications to use.
Possible Errors on Quitting
If exiting of the Alignment Tool is attempted when the radio had been prepared for alignment but not
restored to its initial state, then a warned of this situation is displayed. Choose one of the following options:
Restore the radio before exiting
Exit without restoring the radio
Abort the exit
The Alignment Tool will carry out the action chosen.
BACKGROUND SETTINGS
Certain settings on the PC will affect the operation of the Alignment Tool. These are outlined below.
Display settings
The size of the Alignment Tool application window will depend upon the current resolution of the
display.
To determine the current resolution of the display, go to Program Manager and select
Windows Setup (normally in the Main program group). The Display heading usually shows the current
display settings in the format:
W x H x C (Font)
where W = Width Resolution (in pixels)
H = Height Resolution (in pixels)
C = Colour - Number of colours supported
Font = Small or Large Fonts
The minimum resolution supported by the Alignment Tool is 640 x 480. At this resolution, the
Alignment Tool application window will fill most of the screen; at higher resolutions the application window
will be displayed as a smaller window.
The Alignment Tool will be shown adequately at any ‘Number of Colours’ setting from 16 colours
upwards. The graphics mode of the display driver should either be: VGA or Super VGA (SVGA) type; it
should not be CGA or XGA.