Service manual

TP0332/2 D.3
Installation will now commence with a progress indicator in the centre of the screen showing overall
progress in copying Alignment Tool files into the specified directory.
In addition, there are three indicators on the left hand side as shown in Figure D.1.
Figure D.1 Installation Progress Indicators
Individual File Copied Indicator - This shows the progress made in copying a
particular file to the target directory.
Installation Disk Amount Copied Indicator - This shows how much of the current installation
disk has been copied to the target directory. When
this has reached its maximum, insert the next
installation disk at the prompt.
Hard Disk Free Space Indicator - This shows the free space available on the PC’s
hard disk; even if this shows Low, a complete
installation will still occur (installation would not
have been allowed to get to this stage if there was
not enough disk space).
Note: Installation may be cancelled at any time by selecting the Cancel button,
although this is not recommended as it may leave the installation in a midway
state.
(6) Insert the next disk when prompted and select OK on the dialogue that appears. Installation will
continue, with these prompts, until the last disk is inserted.
(7) Once the overall progress indicator has reached 100%, the installation will update certain Windows
system files; please wait whilst these files are updated - do not attempt to interrupt this process as
the installation will be left in an unstable state.
A Restart Windows dialogue will eventually appear.
(8) Select the appropriate option from the Restart dialogue and select the OK button. The options are
as follows:
(a) Yes, I want to restart Windows now - If the alignment tool is to be used immediately.
(b) No, I will restart my computer later - If the Alignment Tool is not required immediately.
Note that the tool should not be used until the
computer has been re-started.
When Windows is restarted, a Program Group named ‘SRP80 series Tools’ is displayed containing a
Program Item ‘SRP80 series Alignment Tool’. This group may already contain the SRP8000 Series
Programmer (if previously installed).
Hard Disk Free Space Indicator
Installation Disk Amount Copied Indicator
Individual File Copied Indicator