Service manual

2.2 TP0332/2
Charging the Battery
Figure 2.2 Battery Charging Sequence
The SRP8000 Series Portable Radio is supplied with batteries in their discharged state. Before
using the radio, it is necessary to charge the battery using one of the approved battery chargers.
This takes approximately one hour, after which the red LED changes to green.
Fitting the Antenna
Figure 2.3 Fitting the Antenna
WARNING
To avoid injury from the high RF voltage available at
an unterminated connector, the radio should not be
operated without an antenna fitted.
RED LED
GREEN LED
C
Y
A
N
O
A
C
RY
L
A
T
E
(2)(1) (3)