Operating instructions

SRM9030plus ~ PMR Mobile Radio User Guide

1. INTRODUCTION

1.1 O

VERVIEW

The SRM9000 Series Radios are versatile Digital Signal Processor (DSP) controlled, two-way

mobile radios. The SRM9000 Series is available in a number of frequency bands and

versions for specific applications. This manual describes the operation of the SRM9030

plus

PMR variant.

The radio consists of a Transceiver unit that may be mounted in the vehicle boot or under a

seat, and a Control Unit, which is designed to mount on the vehicle console or within view and

reach of the driver. A microphone and speaker connected to the control unit provide the

audio interface.

The radio is software programmable and it can be customised to the operational requirements

of your particular fleet. Your Simoco representative can help in programming your radio

facilities to meet your present and future requirements.

This guide describes the facilities that are currently available and can be programmed into the

SRM9030

plus

1.2 I

NSTALLATION

As the installation of your SRM9030plus Radio is a technical and possibly hazardous

operation, we recommend that it is installed and set up for use by your dealer or an

authorised installer. However, if you need information regarding the correct procedures for

installation, please refer to the SRM9000 Series Installation Instructions supplied with the

radio.