Operating instructions

SRM9030plus ~ PMR Mobile Radio User Guide
© Comgroup Australia 2010 29 TNM-U-E-0092 Issue 1.1a
8. OPTIONS
The following options are available; contact your Simoco Dealer for further information.
8.1 Q
UICK
R
ELEASE
T
RANSCEIVER
K
IT
This kit provides a mounting cradle to allow the Transceiver to be quickly removed without
having to undo unnecessary screws.
8.2 M
ICROPHONE
/C
ONTROL
H
EAD
E
XTENSION
L
EAD
This lead allows the Transceiver to be placed up to 4.5 metres from the Control Head.
8.3 VOX H ANDSFREE O PTION
This allows a driver to use the radio without having to lift the microphone or press any
buttons.
8.4 I NTERNAL S YSTEMS AND I NTERFACE O PTION (MA-DMAP)
This option provides eight I/O lines, serial interfaces and pre/de-emphasised audio to allow
external interfacing to the radio. This option also contains a DSP for custom radio
applications. Applications include intelligent repeater, single control head for two radios and
two control heads on one radio.
8.5 I NTERNAL GPS AND I/O O PTION (MA-ASIG)
This provides Global Position reporting for Trunk and PMR applications as well as an audio
and data interface. Can be supplied with or without GPS receiver. Two control heads can be
used with this option.
8.6 C ROSS - LINKED C ABLE
This is used with various applications to cross-connect or interconnect Transceivers or
Control Heads.
8.7 600 O HM I NTERFACE O PTION (MA-SIXOHM)
This provides a balanced 600 Ohm 2/4 wires audio interface and opto-isolated E and M lines.
8.8 D ESK T OP B ASE K IT (MA-DESKBAS30U)
This provides a housing for the radio and incorporates an 8 Amp Power Supply Unit and
speaker.