Operating instructions

SRM9030plus ~ PMR Mobile Radio User Guide

6.1.3.4 Using the Keypad

When using the keypad to type text:

Press the appropriate keypad button a number of times until the desired character or number

is selected, the current character space is identified by a flashing block cursor,

Use # to toggle to select lower/upper case letters.

Use the Left/Right Arrow buttons to move to the next or previous character space to be

entered/modified, and press to accept and go to the next Screen.

6.1.3.5 Contrast

The Contrast Screen allows you to set the contrast level of the Display from 0 to 15.

Use the Left/Right Arrow buttons to select the required level.

Press (OK) to accept the setting and go to the Channel Screen.

Note: The contrast can be restored to factory default by entering *55# from the main menu.

6.1.4 Alert Volume

This Screen allows you to set the level of the Alert Volume Beep Tone in relation to the

current Volume setting. The level can be set in 63 steps over the range -31 to +30.

Use the Left/Right Arrow buttons to change the relative alert level.

Press (OK) to accept the setting and go to the Channel Screen.

Note: A minimum Alert Level may be set by the FPP to ensure the Alerts can always be

heard from the speaker.