Operating instructions

SRM9030plus ~ PMR Mobile Radio User Guide

5.5.2 Scan-Edit Screen

In the Scan-Edit Screen the display shows the Channel List (excluding Vote and MultiAx

channels) and the Message-Line shows either “Member”, “Priority” or is blank for channels

that are not scanned.

Press (Prty) to make the displayed Channel the Priority Channel (replacing any previous

Priority Channel assignment, which is then made a normal member of the group).

Press (Add) to add the displayed Channel. If Scan-Group is full, error-beeps will sound.

Press (Del) to remove the displayed Channel.

Press (OK) to exit back to the Scan Screen or Red-Handset.

Left/Right Scroll Buttons are used to select the channels.

Keypad allows Channel-Change strings (e.g. 456# goes to Channel 456) to valid channels

that may be included in the Scan Group (i.e. not Vote or MultiAx channels).

5.6 MUTE L

EVEL

ETTING

When the Mute Adjust Screen is selected the Left/Right Arrow buttons allow the displayed

Radio Mute level to be adjusted. The level is stored when the Screen is exited.

5.7 DTMF O

PERATION

When DTMF is enabled, DTMF tones can be sent using the Keypad from the Main Channel

Screen. Pressing 0...9, * and # will send the associated tones.

The tone period and gap are set by the FPP.

DTMF can be enabled in several ways:

• Via the DTMF option in the User-Options sub-menu under the SETUP Menu (refer to

Section 6).

• If the DTMF Function is assigned to a F1...4 button, DTMF is enabled when the button

indicator is ON.