Operating instructions

SRM9030plus ~ PMR Mobile Radio User Guide
© Comgroup Australia 2010 15 TNM-U-E-0092 Issue 1.1a
5.4 SELCALL F UNCTIONS
5.4.1 Receiving a Selcall
A number of different options can be set up by your dealer to sound various alert tones when
a selcall is received. Consult your dealer for a detailed explanation of your radios set up.
When a Selcall is received the radio may respond by:
•
Showing a flashing or solid icon to indicate that the radio has been Called or is On-call,
•
Sounding an Alert tone, or
• Displaying the Name of the caller (if it exists in the Phonebook) or the numerical identity of
the caller (if unknown) in the Name field.
Pressing PTT and/or removing the Microphone from its Cradle will change the state of the
icon, stop the Alert tone and enable the speaker audio.
Replacing the Microphone back into its Cradle will clear the icon (and/or mute the speaker).
5.4.2 Sending a Selcall
Refer to sections on
Phonebook Screen
(page 6) and
Status Screen
(page 7) for methods of
sending a Selcall.
5.4.3 Other Selcall Functions
The SRM9030 has several other functions that affect how the radio operates with received
signals or selcalls. These are described later in this booklet under the headings:
Monitor/Reset (refer to Section 7.1)
Reset (refer to Section 7.3)
Send-1, Send-2 (refer to Section 7.6)
Transpond Enable (refer to Section 7.7)
Special Encode1...8 (refer to Section 7.12)