Operating instructions

SRM9030plus ~ PMR Mobile Radio User Guide
© Comgroup Australia 2010 12 TNM-U-E-0092 Issue 1.1a
5. COMMON FUNCTIONS AND FACILITIES
5.1 S WITCH -O N /S WITCH -O FF
Momentarily press the
On/Off/Volume
Knob to switch the radio
ON
.
The display will illuminate and show a ‘Welcome Message’ (SRM9030) and the Selcall Identity
of the radio (101) in example below.
After a brief time the display will revert to the
Channel Screen
, at which time the radio is ready
for use.
Pressing and holding the
On/Off
knob for approximately 2 seconds will switch the radio
Off
.
If the radio
Inactivity Timer
is enabled, the radio will automatically turn
Off
after a time of
inactivity (i.e. no buttons pressed). The inactivity time is programmable.
The radio will emit warning beeps for 10 seconds prior to switching off. Pressing any button
will reset this timer.
The radio can also be setup to switch on automatically with the Vehicle Ignition whenever the
vehicle is started.
5.1.1 Volume Adjustment
The Volume Control adjusts the speech level at the loudspeaker or handset. Rotating
clockwise increases the volume and anti-clockwise decreases the volume.
Note: The radio may be programmed so that the volume cannot be turned off completely.