Operating instructions

SRM9030plus ~ PMR Mobile Radio User Guide
© Comgroup Australia 2010 9 TNM-U-E-0092 Issue 1.1a
4.5 S TORED C ALLS (T EXT M ESSAGE )
Received text messages are stored in the Stored Calls screen. Text messages may be up to
237 characters in length.
A Data message may also be displayed immediately when received if configured to do so by
the FPP as shown below.
Pressing any key will return to the default channel screen.
If the radio is not configured to show the message immediately, the icon will show on the
main channel screen. A “bip” tone is emitted every few seconds when a text message has
been received.
When the Stored Calls screen is selected, the displayed text identifies the caller (e.g. 0100)
by their data address. For example “ID: 00100”. If the caller is the dispatcher as defined by
the FPP, the caller’s identity is not shown.
When the message is selected, the screen shows the full message. If the message exceeds
the screen, a soft key titled “more” will allow access to the other screen.