Operating instructions

SRM9030 ~ Mobile Trunk Radio User Guide
TNM-U-E-0004
Page 26 © Simoco Europe 2001
7.1.4 Contrast
The Contrast menu allows you to set the
contrast level of the Display in the range
from 0 to 15.
Use the
Left/Right Arrow
buttons to select
the required level.
Press to accept the setting and go to
the Main Menu.
7.1.5 Alert Volume
This menu allows you to set the level of the
Alert Volume Beep Tone in relation to the
current Volume setting. The level can be set
in 63 steps over the range -31 to +30.
Use the
Left/Right Arrow
buttons to change
the relative alert level.
Press to accept the setting and go to the
Main Menu.
Note: A minimum Alert level may be set to ensure that Alerts can always be
heard from the speaker.
7.1.6 Information
This menu displays information that identifies
the Programmer File description, Software
Version and Trunk ID.
This is a read only menu, press to go to
the Main Menu.
7.1.7 Network
The Network menu allows you to switch
operation between;
•
Trunk Network 1.
•
Trunk Network 2 or
•
PMR.
Use the
Left/Right Arrow
buttons to make
your selection.
Press to accept that selection and go to the Main Menu. Refer to the
Conventional User Guide for PMR operation.
10
OK
Contrast
00
OK
Alert Volume
Fleet Coms
TK Band
TMR V1.19
201-5743-23
S/N 123456
OK
Radio Information
OK
Network
PMR