Operating instructions

SRM9030 ~ Mobile Trunk Radio User Guide
TNM-U-E-0004
Page 19 © Simoco Europe 2001
6.3 R
ECEIVING A
C
ALL
The SRM9030 will respond to incoming calls according to the type of call
being received.
There are three types of call:
•
Voice Call.
•
Group Voice Call.
•
Status Message or Data Message.
6.3.1 Receiving a Voice Call
When a call is received the radio will ring and display the call setup icon
and the origin of the call.
While the radio is ringing, the user can answer the call:
•
by pressing the
Microphone PTT
button
•
by removing the Microphone from its bracket, or
•
by pressing the
Green Handset
button.
When you answer the call, both radios will be connected and will display the
audio enabled icon.
A conversation can now take place by each operator, in turn, pressing their
Microphone PTT buttons and speaking.
When the call is finished, either operator can end the call by:
•
replacing the Microphone on its bracket, or
•
pressing the
Red Handset
button.
If a ringing call is not answered before the Network times out, or
the Caller cancels the call, details of the call are entered in the Stored Calls
Screen, refer to paragraph 4.2.
Notes: 1 The SRM9030 responds in the same manner as above for
Priority and Emergency calls. Emergency Calls show
Emergency on the display.
2. Some Trunking Networks provide a different Call-Set-Up method
which allows the radios to automatically answer incoming Voice
Calls or allows the Caller to speak to the called person while the
radio is ringing.