Operating instructions

SRM9030 ~ PMR Mobile Radio User Guide
TNM-U-E-0003 Issue 3 Page 20 © TMC Radio 2005
5.5.2 Scan-Edit Screen
In the Scan-Edit Screen the display shows the Channel List (excluding Vote
and MultiAx channels) and the Message-Line shows either “Member”, “Priority”
or is blank for channels that are not scanned.
Press (Prty) to make the displayed
Channel the Priority Channel (replacing any
previous Priority Channel assignment, which
is then made a normal member of the group).
Press (Add) to add the displayed
Channel. If the Scan-Group is full, then error-
beeps sound.
Press (Del) to remove the displayed Channel.
Press (OK) to exit back to the Scan Screen (like Red-Handset).
Scroll Buttons are used to select the channels.
Keypad allows Channel-Change strings (e.g. 456# goes to Channel 456) to
valid channels that may be included in the Scan Group (i.e. not Vote or
MultiAx channels).
5.6 MUTE L EVEL S ETTING
When the Mute Adjust Screen is selected the Left/Right Arrow buttons
allow the displayed Radio Mute level to be adjusted. The level is stored when
the Screen is exited.
5.7 DTMF O PERATION
When DTMF is enabled, DTMF tones can be sent using the Keypad from the
Main Channel Screen. Pressing 0...9, * and # will send the associated tones.
The tone period and gap are set by the programmer.
DTMF can be enabled in several ways:
• Via the DTMF option in the User-Options sub-menu under the SETUP
Menu (refer to Section 6).
• If the DTMF Function is assigned to a F1...4 button, DTMF is enabled
when the button indicator is ON.
19
12 4
Prty
Del
Mt Bigfoot
Member
Add
OK