Operating instructions

SRM9020plus ~ PMR Operating Instructions
© Comgroup Australia 2010 Page 21 TNM-U-E-0086 Issue 1.0a
7.8 M UTE
Provides direct access to the Mute Setup screen and allows the user to change
the mute level from that screen.
7.9 E XTERNAL A LERT
Enables/Disables control of External Output via Selcall Decodes.
The display briefly shows ON or OFF when the button is pressed.
7.10 G OTO C HAN A, B, C, D
Selects predefined Channel A, B, C or D, and returns on the second press. The
Defined Channel is redefined to the current channel if held for approximately 2
seconds.
The display briefly shows ON or OFF when the button is pressed.
7.11 A LARM
Puts the mobile into Alarm mode.
7.12 R EPEATER D EFEAT
Allows the radio to transmit on the reverse frequency on a Repeater Channel.
When the button is pressed again (or the Channel is changed) the transmit
frequency reverts to the original setting.
The display briefly shows ON or OFF when the button is pressed.
7.13 L OW P OWER
Forces the radio to low power. Pressing again puts the radio back to the power
level defined for the current channel. This is not affected by Channel changes.
The display briefly shows ON or OFF when the button is pressed.
7.14 S CRAMBLER
Toggles the scrambler function for more secure communications..
The display briefly shows ON or OFF when the button is pressed.