Operating instructions

SRM9020plus ~ PMR Operating Instructions
© Comgroup Australia 2010 Page 9 TNM-U-E-0086 Issue 1.0a
The buttons allow access to the other screens (not Main Channel
Screen). When these other menus time-out, the display returns to the Scan
Screen.
The Radio may be programmed so that the Microphone needs to be on-cradle
for the radio to scan. If the Microphone is left off-cradle for too long then the
radio will sound a continuous alert tone until it is replaced.
In the Scan Screen the function buttons are assigned as follows.
M
Go to other menus.
F3
Skip channel (only while receiving a signal).
S
Exit scanning.
The F3 button temporarily deletes (skips) the channel from the Scan-Group.
Skip is only active when stopped on a channel and the Microphone is on-cradle.
Skipped channels are restored when a different Scan Group is selected or if
Scan is exited. The Priority Channel cannot be skipped.