Operating instructions

SRM9020plus ~ PMR Operating Instructions
© Comgroup Australia 2010 Page 24 TNM-U-E-0086 Issue 1.0a
3.2 S WITCH -O N /S WITCH -O FF
Press and hold down the On/Off button for
approximately 2 seconds to switch the radio ON.
The display will illuminate and briefly show an
'Opening Message’ (arranged by your dealer) and the
Selcall Identity of the radio (if used).
After a brief time the display will show the selected
channel, at which time the radio is ready for use.
Pressing and holding the On/Off button for
approximately 2 seconds will switch the radio Off.
If the radio Inactivity Timer is enabled, the radio will
automatically turn Off after several hours of inactivity
(i.e. no buttons pressed). The radio will emit warning
beeps for 10 seconds prior to switching off. Pressing
any button will reset this timer.
The radio can also be set up to switch on
automatically with the Vehicle Ignition whenever the
vehicle is started.