Operating instructions

SRM9020plus ~ Trunked Operating Instructions
© Comgroup Australia 2010 Page 1 TNM-U-E-0085 Issue 1.0b
1. INTRODUCTION
The SRM9000 Series Radios are advanced, versatile, Digital Signal Processor
(DSP) controlled, two-way mobile radios. The SRM9000 Series is available in a
number of frequency bands and versions for specific applications. This manual
describes the operation of the SRM9020plus Trunked Alphanumeric Display
variant.
The radio consists of a SRM9000 Transceiver Unit that may be mounted local or
remote, and a SRM9020plus Alphanumeric Microphone which is designed to
mount within view and reach of the driver. A speaker connected to the radio
provides the audio interface.
The radio is software programmable and it can be customised to the operational
requirements of your particular fleet. Your Simoco representative can help in
programming your radio’s facilities to meet your present and future requirements.
This guide describes the operation of the SRM9020plus facilities.
1.1 I NSTALLATION
As the installation of your SRM9020plus Radio is a technical and possibly
hazardous operation, we recommend that it is installed and set up for use by your
dealer or an authorised installer. However, if you need information regarding the
correct procedures for installation, please refer to the SRM9000 Series Installation
Instructions supplied with the radio.