Installation Manual

PULSE AIR DATA MODEM TNM-M-E-0055
Jan 17 Page 21 Issue 1.0
4 SPARES
4.1 SERVICE CONCEPT
It is a requirement that once the customer has purchased equipment, Simoco can follow this up by
providing an ongoing, high level of customer support together with a competitive and professional
servicing activity.
There are three levels of service available, these are detailed in Table 10 below.
Table 10. Service Levels.
Level
Activity
Recommended
Spares
Recommended Test
Equipment and Tools
1
This is intended to achieve rapid
turnaround by:
 Complete replacement of the
Pulse Air Data Modem.
 Reprogramming.
Faulty units are to be returned to a
Level 2 service facility with an
attached fault report.
This level of service should not
exceed 20 minutes.
Spare Pulse Air Data
Modem.
PC with Programmer (FPP).
Suitable Serial Cable.
2
Level 2 service includes Level 1 with
the addition of fault rectification by:
 Replacement of PCB, mechanical
component, or cable assembly.
 Cosmetic repair.
Listed in Level 2 Spares
Schedule.
Spare parts available to
order from Central
Spares.
As above + service aids and test
equipment.
3
Repair by PCB or mechanical
component replacement, Cosmetic
repair.
Repair of PCB to component level in
Central Repair Unit (CRU).
Listed in Level 2 Spares
Schedule.
Radio PCB components
only available to CRU.
As above + service aids and test
equipment.
4.2 LEVEL 2 SPARES SCHEDULE
4.2.1 Pulse Air Data Modem
The recommended spares schedule for Service Level 2 is shown below in Table 11.
Table 11. Service Level 2 Parts List.
Item
Part Number
Description
1
6102 350 20101
RTU Radio Modem
PCB Assembly
AC
136 – 174 MHz
6102 350 20071
TU
400 – 480 MHz
6102 350 20081
UW
440 – 520 MHz
6102 309 65101
RTU Modem LED PCB
6102 339 65092
RTU Modem Interface PCB (Lower)
6102 349 65191
RTU Modem Interface PCB (Upper)
6102 350 20701
RF Cable (SMA – MCX)
6102 330 00555
Interface Flexi
6102 310 07931
RTU Modem Case End Cap (c/w shielding)