Service Manual

XFIN-BLADE-SM

PROGRAMMER GUIDE PAGE 73

the Xfin Blade Management Terminal in to offline mode click on the small box in

the status bar of the main menu until it says offline.

· Live – When in live mode any changes that are made to the data contained in the

Xfin Blade Management Terminal will also be sent to the Xfin Blade. To place the

Xfin Blade Management Terminal in to Live mode make sure that the Live mode

click on the small box in the status bar of the main menu until it says live.

9.5 A

REA

ONFIGURATION

Choose an area from the main menu to configure by left clicking on one of the large

buttons, which are located in the middle on the main menu form.

The area form will now be shown with the configurable fields. The majority of the forms all

follow this same format and allow you to edit, add, delete, get, get configuration,

accept/send, send configuration and reset configuration. The mode effects differ if the

Xfin Blade Management Terminal is in Live or Offline state. When the Xfin Blade

Management Terminal is in Live mode the changes happen to the Xfin Blade

Management Terminal and the Xfin Blade. When the Xfin Blade Management Terminal is

in Offline mode the changes are only stored in the Xfin Blade Management Terminal.

9.5.1 Edit

To alter any of the fields shown on the form the form needs to be in edit mode. Once the

form is set to edit mode the boxes that were blanked out are now available for altering.

Edit mode will allow you to only alter an existing record.

To set the form in to edit mode left click on the Edit button located on the right hand side

of the screen. To get out of edit mode, click on accept or cancel. Accept will store the

changes, if any that have been made. Cancel will ignore any changes that have been

made and return back to its previous state.

9.5.2 Add

Add mode allows a new record to be added to the Xfin Blade Management Terminal. Left

click on the add button which is locate to the right of the form and an empty form will be

shown. Enter the required data in to all of the boxes.

To accept the record click on the accept button. To cancel the record, click on the cancel

button.

9.5.3 Delete

Delete will remove the current selected record that is being shown from the Xfin Blade

Management Terminal and the Xfin Blade depending on the state of the programmer. Left

click on the delete button located on the right hand side of the form to delete the record.

9.5.4 Accept/Send

Accept/Send will accept the record that is currently being show on the form. Accept/Send

will also send the record to the Xfin Blade as long as comms are established. Left click on

the Accept/Send button located on the right hand side of the form to Accept/Send a

record.