User's Manual

SDB680 – INSTALLATION GUIDE TNM-I-E-0046

May 15 Page 22 WALL MOUNT INSTALLATION

Figure 3. Mounting holes drilling template (dimensions in mm).

Figure 4. Wall Mount Assembly.

1.2

ITTING THE

SDB680

BASE

TATION

10. Ensuring that all cables are clear of the mounting position and cannot be trapped, offer the base station

up to the wall mount unit and fit the four keyhole standoffs on the base station (two per side) into the

mounting grooves on the wall mount case (see Figure 5 overleaf for details).

11. Secure the front panel of the base station to the wall mount brackets using four M6 x 12 mm pozidriv

retaining bolts with plastic cup washers (two per side) (see Figure 6 overleaf).

Inner Chassis Plate

securing points

Wall Mount Brackets