User's Manual
SDB680 – INSTALLATION GUIDE TNM-I-E-0046
Aug 14 Page 33 CONFIGURATION TIER III BASE
21. On the SDMT, on the System I/O Page, carry out the following:
21.1. In the System Monitor area, on the navigation tree, right click on the Base that you
wish to upload the software to. Menu options will be displayed.
21.2. From the menu options, select ‘Update’ > ‘Update Software’.
21.3. In the Comms History area, confirm that a ‘Starting Update Software’ message is
displayed.
21.4. The progress of the software update operation will be displayed in the ‘Current
Message Progress’ area.
21.5. In the Comms History area, after a short delay, confirm that a ‘Completed Update
Software’ message is displayed.
4.6.2 Software Licence Update
22. On the SDMT, on the System I/O Page, select the ‘Browse’ button for the Licence file. An
Open file dialogue window will be displayed.
23. On the ‘Open’ file window, navigate to and select the relevant software licence file. Select
the Open button to load the file into the SDMT.
24. On the SDMT main screen, on the System I/O page, carry out the following:
24.1. In the System Monitor area, on the navigation tree, right click on the VAC for the
system. Menu options will be displayed.
24.2. From the VAC menu options, select ‘Update’ > ‘Update Software’.
24.3. In the Comms History area, confirm that a ‘Starting Update Software’ message is
displayed.
24.4. The progress of the update operation will be displayed in the ‘Current Message
Progress’ area.
24.5. In the Comms History area, after a short delay, confirm that a ‘Completed Update
Software’ message is displayed.
4.6.3 Configuration Creation and Upload
25. Refer to Part 3 of the SDMT User Manual [2] and create a working configuration that
includes the new DMR Base and appropriate for the system in which it is installed.
26. When creating a working configuration, ensure that any changes to the configuration are
saved by selecting the icon that will be displayed on the page tab of the relevant
configuration pages. This will save the changes to the local SQL Server ® database stored
on the PC.
27. On the SDMT main screen, on the ribbon bar, select the System Commands button. The
System I/O configuration page will be displayed.
28. On the System I/O page, carry out the following:
28.1. In the ‘Select Read/Write System Areas’ box, depending on the configuration you
wish to write, select either the ‘Configuration’, the ‘Subscribers’ or both. Select the
‘Write to System’ button.