User's Manual

SDB680 – INSTALLATION GUIDE TNM-I-E-0046

Aug 14 Page 2 PREFACE

PREFACE

Before installation, commissioning or operation, this document should be

read in full. In particular, the following parts MUST be read:

 Appendix A – Simoco Digital Management Terminal (SDMT) Getting

Started Information.

DECLARATION

This Installation Guide covers the SDB680 50 W Base Station for installation in Wall Mount and

Rack Mount variants.

Any performance figures quoted are subject to normal manufacturing and service tolerances. The

right is reserved to alter the equipment described in this manual in the light of future technical

development.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

All information contained in this document is the property of Simoco. All rights are reserved. This

document may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or

reduced to any electronic medium or machine-readable form, without prior written permission from

Simoco.

COMPUTER SOFTWARE COPYRIGHTS

The AMBE+2TM voice coding Technology embodied in this product is protected by intellectual

property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc.

This voice coding Technology is licensed solely for use within this Communications Equipment.

The user of this Technology is explicitly prohibited from attempting to extract, remove, decompile,

reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code

into a human-readable form. U.S. Patent Nos. #6,912,495 B2, #6,199,037 B1, #5,870,405,

#5,826,222, #5,754,974, #5,701,390, #5,715,365, #5,649,050, #5,630,011, #5,581,656,

#5,517,511, #5,491,772, #5,247,579, #5,226,084 and #5,195,166.

DISCLAIMER

There are no warranties extended or granted by this document. Simoco accepts no responsibility

for damage arising from use of the information contained in the document or of the equipment and

software it describes. It is the responsibility of the user to ensure that use of such information,

equipment and software complies with the laws, rules and regulations of the applicable

jurisdictions.

EQUIPMENT AND MANUAL UPDATES

In the interests of improving the performance, reliability or servicing of the equipment, Simoco

reserves the right to update the equipment or this document or both without prior notice.