User's Manual

SDB680 INSTALLATION GUIDE TNM-I-E-0046
Aug 14 Page 12 TOOLS & TE
RECOMMENDED TOOLS AND TEST EQUIPMENT
The following list of Tools, Electrical Engineering Test Equipment and Materials are required to
carry out the Assembly procedures contained in this document.
TOOLS
1. Electric Drill (preferably with Hammer Action).
2. 7.5 mm Drill Bit.
3. Spirit Level.
4. Pozidriv Screwdriver.
TEST EQUIPMENT
5. Anritsu/Wiltron S331A Test Set.
6. Earth Bonding Test Set.
7. Dummy Load.
8. Wattmeter (50 Ω Test Set).
CABLES
9. USB Cable.
10. Ethernet Switch Cable.
MATERIALS
11. 4 x M4 x 12 Screws (supplied).
12. 4 x Rawlplugs (supplied).
13. 4 x No. 12 x 1½” Woodscrews (supplied).
14. M6 x 12 mm Pan Head Pozidriv Retaining Bolts.
15. M6 x 16 mm Pan Head Pozidriv Retaining Bolts.
16. M6 Nuts and Plain Washers.
17. Plastic Cup Washers.
18. M6 Cage Nuts.
OTHER ITEMS
19. Personal Computer (PC) with the following Software Applications installed:
(a). Simoco Digital Management Terminal (SDMT).
(b). Simoco IP Configuration Tool.