User Manual

SDB670 – SERVICE MANUAL TNM-M-E-0032
May 13 Page 18 PRODUCT CODES
2.2 F ACTORY C ODE
The Factory Code number is used to uniquely identify the equipment.
This number is generated from the Order Code, Engineering Change Number (ECN)/build version,
the date of manufacture, manufacturer code, and a unique four character base 33 sequence
number.
The factory code is printed on a label that is fitted to the base station’s Control Board, MMI Board
and the chassis. The label shall also contain a 3D ‘QR’ code.
The factory code is also included on the Radio Label.
Fields 1 – 8 Field 9 Field 10 Field 11 Field 12
6B1TUA1S000 0006 1305 7 0001
The fields of the factory code are broken down as shown below in Table 2.
Table 2. Factory Code Information.
Fields Description Range Example Explanation
1-8 Order Code 6B1TUA1S000 Refer Section 2.1.
9
ECN/Build
Version
0 – Z 0006
Four digit alpha numeric ECN number.
Entered via drop-down list in factory
programmer.
10
Date of
Manufacture
YYWW 1305 Year 2013, Week 5
3 ADI
5 EMMT
7 Jabil
8 Tioga
11
Manufacturer
Code
0 – Z
9 Simoco Derby
12 Serial Number 0001 – ZZZZ 0001
Sequential serial numbers. Base 33
(excludes I, O and U).
2.3 R ADIO L ABEL
The Radio Label shall contain information that uniquely identifies the Transceiver, including a
unique Radio Serial Number.
2.3.1 Radio and Control Card Serial Number
The Radio and Control Card Serial Numbers are generated from the Factory Code and are created
with the following fields:
Field 1 Field 2 Field 3 Field 4 Field 5 Field 6
3 6 M TU 1305 153T
The fields of the radio serial number are broken down as shown overleaf in Table 3.