User Manual

SGD-SB2025NT-TUM

Jan 12 Page ix GENERAL NOTES

GENERAL NOTES

ANUAL

OMPILATION

This manual provides detailed information on the SB2025NT base station. It is divided into two

parts.

Part 1 – Technical Manual

Part 1 is the Technical Manual, which includes information on Installation and Operation, General

Description, Technical Description, Alignment and Testing, Fault Finding and Drawings for the

base stations.

Details of both “basic” and “optional units” have been included in the Technical Manual, therefore,

some material may not be relevant to every system. Configuration is dependent upon the

specification by the customer when the equipment was ordered and installed.

The manual has been compiled with a two-tier maintenance policy in mind, i.e. first-line fault

location and repair by replacement, followed by subsequent bench-testing of sub-assemblies to

specification. Consequently, some “overlap” and/or duplication of information has resulted.

Part 2 – User Manual

Part 2 is the User Manual for the ET software application. The ET is the primary source for

controlling, configuring and monitoring the Solar 2 Modules fitted within the SB2025 series of base

stations.

AGINATION

Each part of the manual is divided into a number of sections, each section deals with one aspect of

the system.

Following initial issue, any page that has been amended or updated will also bear an updated

reference.

ARTS

ISTING

A Composite List of Replaceable Assemblies (i.e. a list of all components used in the system) is

included at Part 1, Section 9.